LAB READY
1
Separate material and geometry decisions
Titanium, stainless steel, PEEK and PPSU have different machining, finishing and handling requirements. The selected grade and required documentation should be explicit in the RFQ.
Spine Manufacturing
Spinal device and implant manufacturing
Manufacturing support for interbody components, fixation hardware and the instruments used to place them.
Application Overview
Manufacturing planned around the component
Spinal implant manufacturing can bring polymer and metal components, small features, internal geometry and implant-to-instrument interfaces into the same program. The manufacturing route should follow material, feature access, quantity and the interfaces the engineering team needs to evaluate.
Titanium / PEEKCommon listed spine materials
5-axis CNCComplex machined geometry
Wire / sinker EDMNarrow and difficult-to-access features
Trial assemblyOptional implant-to-instrument checks
Engineering Decisions
What to settle before manufacturing starts
Useful quoting starts with the real drawing, material, quantity, interfaces, final condition and inspection requirements.
2
Match specialty processes to the feature
Five-axis machining can establish complex external geometry, while wire, sinker or small-hole EDM may be reserved for narrow slots, internal forms or conductive features that earn the additional process.
3
Define the interface check
For an interbody, fixation or instrument set, identify the mating parts, critical engagement features and the condition in which fit should be evaluated before shipment.
Materials & Final Condition
Specify more than the material family
The listed spine material scope includes titanium alloys, stainless steels, PEEK and PPSU. Material tradeoffs should be evaluated against geometry, mechanical requirements, sterilization strategy and the device manufacturer's approved specification.
Review materials and finishingRelated Capabilities
Connect the application to the process
Use these pages to compare the manufacturing routes, materials and quality considerations that support this device category.
Frequently Asked Questions
Spinal Devices manufacturing questions
Which processes fit spinal device components?
The route may combine multi-axis CNC machining with EDM, grinding or metal additive, depending on material, geometry, tolerances and quantity.
Can PEEK spinal components be included in an RFQ?
Yes. PEEK is included in the listed engineering-plastic scope. Specify the exact grade, documentation and application requirements for review.
Can spinal implant and instrument interfaces be checked together?
Optional trial assembly and fit checks can be scoped when the mating components and acceptance criteria are available.
Have a spinal device component to review?
Send the drawing, material, mating-part requirements and target date so the manufacturing route can be reviewed.